UpdateSiteConfigurationDTO

site_configuration object

anyOf

SiteConfiguration

device_list object[]required

Array [

oneOf

AcChargingPole3Phase

nameName (string)required

The name of the device itself. This value will be used as the asset ID in the rest of the API.

collectorCollector (string)required

The name of the collector to which this device is connected.

ingress_validation object

Overrides the site-level ingress validation config for this asset. When set, controls how often measurements are expected during active and inactive transactions. When null, the site-level configuration is used.

anyOf

AssetIngressValidationConfig

with_transaction_expected_measurement_intervalstring<duration>

Expected measurement interval for the asset while it has an active transaction. Measurements arriving less frequently than this are flagged as stale by ingress validation. Note: the UCL calculation requires measurements at least every 5 minutes to produce accurate results, so this value should not exceed 5 minutes for assets that participate in the uncontrollable-load computation.

without_transaction_expected_measurement_interval object

Expected measurement interval for the asset when no transaction is active. When null, the asset is always considered valid while idle. Note: the UCL calculation requires measurements at least every 5 minutes to produce accurate results, so if this asset contributes to the uncontrollable-load computation it should still report at least every 5 minutes.

anyOf

string

string

null

null

null

null

typeType (string)

Constant value: charging_pole_3phase

Default value: charging_pole_3phase

line_currentLine Current (integer)required

The line current in Ampere.

pin_to_phase_mapping objectrequired

Defines how charging pole pins map to the collectors' phases. For more information see the 'Key Concepts - Site configuration' section in the documentation.

pin_liststring[]required

Possible values: [pin1, pin2, pin3]

phase_liststring[]required

Possible values: [L1, L2, L3]

DcChargingPole

phase_permutations object

Specify the phase mapping between this asset (child) and its parent collector (parent). Leave unset when the wiring is unknown; phase-aware control (use_topology) requires every asset's mapping to be declared, so a single unset mapping makes the controller fall back to the worst case.

anyOf

PhasePermutation

parentstring[]required

Possible values: [L1, L2, L3]

childstring[]required

Possible values: [L1, L2, L3]

null

null

nameName (string)required

The name of the device itself. This value will be used as the asset ID in the rest of the API.

collectorCollector (string)required

The name of the collector to which this device is connected.

ingress_validation object

Overrides the site-level ingress validation config for this asset. When set, controls how often measurements are expected during active and inactive transactions. When null, the site-level configuration is used.

anyOf

AssetIngressValidationConfig

with_transaction_expected_measurement_intervalstring<duration>

Expected measurement interval for the asset while it has an active transaction. Measurements arriving less frequently than this are flagged as stale by ingress validation. Note: the UCL calculation requires measurements at least every 5 minutes to produce accurate results, so this value should not exceed 5 minutes for assets that participate in the uncontrollable-load computation.

without_transaction_expected_measurement_interval object

Expected measurement interval for the asset when no transaction is active. When null, the asset is always considered valid while idle. Note: the UCL calculation requires measurements at least every 5 minutes to produce accurate results, so if this asset contributes to the uncontrollable-load computation it should still report at least every 5 minutes.

anyOf

string

string

null

null

null

null

typeType (string)

Constant value: dc_charging_pole

Default value: dc_charging_pole

max_powerMax Power (integer)required

The maximum power in Watt for the charging pole itself / connection to the charging pole.

strategyChargingStrategy (string)

Possible values: [load-balancing, scheduled]

Default value: load-balancing

ForecastedThreePhaseDevice

phase_permutations object

Specify the phase mapping between this asset (child) and its parent collector (parent). Leave unset when the wiring is unknown; phase-aware control (use_topology) requires every asset's mapping to be declared, so a single unset mapping makes the controller fall back to the worst case.

anyOf

PhasePermutation

parentstring[]required

Possible values: [L1, L2, L3]

childstring[]required

Possible values: [L1, L2, L3]

null

null

nameName (string)required

The name of the device itself. This value will be used as the asset ID in the rest of the API.

collectorCollector (string)required

The name of the collector to which this device is connected.

ingress_validation object

Overrides the site-level ingress validation config for this asset. When set, controls how often measurements are expected during active and inactive transactions. When null, the site-level configuration is used.

anyOf

AssetIngressValidationConfig

with_transaction_expected_measurement_intervalstring<duration>

Expected measurement interval for the asset while it has an active transaction. Measurements arriving less frequently than this are flagged as stale by ingress validation. Note: the UCL calculation requires measurements at least every 5 minutes to produce accurate results, so this value should not exceed 5 minutes for assets that participate in the uncontrollable-load computation.

without_transaction_expected_measurement_interval object

Expected measurement interval for the asset when no transaction is active. When null, the asset is always considered valid while idle. Note: the UCL calculation requires measurements at least every 5 minutes to produce accurate results, so if this asset contributes to the uncontrollable-load computation it should still report at least every 5 minutes.

anyOf

string

string

null

null

null

null

typeType (string)

Constant value: forecasted_series_3phase

Default value: forecasted_series_3phase

line_currentLine Current (integer)required

The line current in Ampere.

forecast_typeForecastTypeSiteConfiguration (string)required

Defines the type of forecast to be used for this device.

Possible values: [pv, load]

should_be_aggregatedShould Be Aggregated (boolean)

Default value: false

curtailment_modeCurtailmentMode (string)

How the controller may curtail this device's production to respect the grid minimum. NONE never curtails; CONTINUOUS curtails to any level. Only relevant for PV devices.

Possible values: [none, continuous]

Default value: none

BessDevice

phase_permutations object

Specify the phase mapping between this asset (child) and its parent collector (parent). Leave unset when the wiring is unknown; phase-aware control (use_topology) requires every asset's mapping to be declared, so a single unset mapping makes the controller fall back to the worst case.

anyOf

PhasePermutation

parentstring[]required

Possible values: [L1, L2, L3]

childstring[]required

Possible values: [L1, L2, L3]

null

null

nameName (string)required

The name of the device itself. This value will be used as the asset ID in the rest of the API.

collectorCollector (string)required

The name of the collector to which this device is connected.

ingress_validation object

Overrides the site-level ingress validation config for this asset. When set, controls how often measurements are expected during active and inactive transactions. When null, the site-level configuration is used.

anyOf

AssetIngressValidationConfig

with_transaction_expected_measurement_intervalstring<duration>

Expected measurement interval for the asset while it has an active transaction. Measurements arriving less frequently than this are flagged as stale by ingress validation. Note: the UCL calculation requires measurements at least every 5 minutes to produce accurate results, so this value should not exceed 5 minutes for assets that participate in the uncontrollable-load computation.

without_transaction_expected_measurement_interval object

Expected measurement interval for the asset when no transaction is active. When null, the asset is always considered valid while idle. Note: the UCL calculation requires measurements at least every 5 minutes to produce accurate results, so if this asset contributes to the uncontrollable-load computation it should still report at least every 5 minutes.

anyOf

string

string

null

null

null

null

typeType (string)

Constant value: battery_energy_storage_system

Default value: battery_energy_storage_system

charging_efficiencyCharging Efficiency (number)

Charging efficiency of the battery [0 < x <= 1].

Possible values: > 0 and <= 1

Default value: 0.95

discharging_efficiencyDischarging Efficiency (number)

Discharging efficiency of the battery [0 < x <= 1].

Possible values: > 0 and <= 1

Default value: 0.95

maximum_charging_powerMaximum Charging Power (number)required

Maximum charging power of the battery in W.

Possible values: > 0

maximum_discharging_powerMaximum Discharging Power (number)required

Maximum discharging power of the battery in W.

Possible values: > 0

operational_battery_capacityOperational Battery Capacity (number)required

The operational battery capacity in Wh.

Possible values: > 0

charging_priorityCharging Priority (integer)

Priority of charging the battery. Default is 10

Possible values: >= 1 and <= 10

Default value: 10

discharging_priorityDischarging Priority (integer)

Priority of discharging the battery. Default is 10

Possible values: >= 1 and <= 10

Default value: 10

policies object[]

List of policies for the BESS device.

Array [

oneOf

ScheduledBessPolicy

typeType (string)

Constant value: schedule

Default value: schedule

schedule objectrequired

The schedule defining when the state of charge should be between minimum_state_of_charge and maximum_state_of_charge.

frequency

The schedule defining when the state of charge should be between minimum_state_of_charge and maximum_state_of_charge.

Possible values: [continuous, once, weekly]

continuous

object

once

date_timesstring<date-time>[]required

List of specific date-times in ISO 8601 format with timezone

Possible values: >= 1

weekly

day_of_weekDayOfWeek (string)[]required

Days of week when the schedule runs

Possible values: [Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday], >= 1

timeTime (string)required

Time in HH:MM format (24-hour)

Possible values: Value must match regular expression ^([0-1][0-9]|2[0-3]):[0-5][0-9]$

timezoneTimezone (string)required

IANA timezone identifier

minimum_state_of_chargeMinimum State Of Charge (number)required

The minimum state of charge to reach at the scheduled time. At each timestamp in the schedule, the state of charge will be between minimum_state_of_charge and maximum_state_of_charge.

Possible values: >= 0 and <= 100

maximum_state_of_chargeMaximum State Of Charge (number)required

The maximum state of charge to reach at the scheduled time. At each timestamp in the schedule, the state of charge will be between minimum_state_of_charge and maximum_state_of_charge.

Possible values: >= 0 and <= 100

violation_price_euros_per_mwhViolation Price Euros Per Mwh (number)

Soft-constraint penalty in euros per MWh of state-of-charge band violation. The default acts as a near-hard constraint; lower values let the optimiser cross the band when the expected revenue justifies it.

Possible values: >= 0

Default value: 3000000

BessHysteresisChargePolicy

typeType (string)

Constant value: charge-hysteresis

Default value: charge-hysteresis

start_charging_belowStart Charging Below (number)required

The state of charge at or below which the battery starts charging.

Possible values: >= 0 and <= 100

stop_charging_atStop Charging At (number)required

The state of charge at which the battery stops charging.

Possible values: >= 0 and <= 100

]

]

collector_list object[]required

The site's root collector, its grid connection. A site has exactly one; collectors below the grid connection belong in its children.

Possible values: <= 1

Array [

phase_permutations object

Specify the phase mapping between this asset (child) and its parent collector (parent). Leave unset when the wiring is unknown; phase-aware control (use_topology) requires every asset's mapping to be declared, so a single unset mapping makes the controller fall back to the worst case. The root collector is exempt: it is the grid connection, whose phases are the reference frame every other mapping is expressed against, so the controller always treats it as the identity and it may only be left unset or declared as the identity.

anyOf

PhasePermutation

parentstring[]required

Possible values: [L1, L2, L3]

childstring[]required

Possible values: [L1, L2, L3]

null

null

nameName (string)required

children object

The children of this collector. This is used to create a tree structure.

anyOf

array

Array [

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

]

null

null

line_currentLine Current (integer)required

The line current in Ampere.

safe_line_current object

An optional, safer line current in Ampere used by the optimizer instead of line_current when set.

anyOf

integer

integer

null

null

min_phase_current object

An optional lower bound in Ampere per phase. Set it to 0 on the main collector to forbid injection into the grid.

anyOf

number

number

null

null

phase_voltagePhase Voltage (integer)required

The phase voltage is in Volt.

commodityCommodity (string)

Default value: electricity

1P_3PCollectorType (string)

Specifies whether the collector is single-phase (1P) or three-phase (3P).

Possible values: [1P, 3P]

Default value: 3P

]

null

null

optimization_configuration object

anyOf

OptimizationConfiguration

peak_minimization object

anyOf

PeakMinimization

active object

Boolean field that indicates if the peak minimization is activated or not.

anyOf

boolean

boolean

null

null

peak_limit object

Specifies a line under which the peak price does not apply. The value specified will be applied to all the phases of the collector separately. By default the peak_limit is set to 0.

anyOf

integer

integer

null

null

null

null

negative_peak_minimization object

anyOf

PeakMinimization

active object

Boolean field that indicates if the peak minimization is activated or not.

anyOf

boolean

boolean

null

null

peak_limit object

Specifies a line under which the peak price does not apply. The value specified will be applied to all the phases of the collector separately. By default the peak_limit is set to 0.

anyOf

integer

integer

null

null

null

null

cost_minimization_activeCost Minimization Active (boolean)

Boolean field that indicates if cost minimization (energy price optimization) is activated or not.

Default value: true

planning_frequencyPlanning Frequency (string)

The planned frequency at which a site will be optimized. Should follow the python timedelta notation. Currently this field is disabled as we only support 15 minutes long optimization configuration. Notation is in Pandas Timedelta notation.

Constant value: PT15M

Default value: PT15M

planning_horizonPlanning Horizon (string)

The planning horizon for which the optimization will be done. Should follow the ISO-8601 duration notation.

Possible values: [PT2H, PT4H, PT6H, PT8H, PT10H, PT12H, PT15H, PT18H, P1D, P2D, P3D]

Default value: P1D

null

null

energy_contract object

anyOf

EnergyProviderContract-Input

contract_type

Possible values: [day_night_be, dynamic, fixed]

day_night_be

day_offtake_cost_per_mwhDay Offtake Cost Per Mwh (number)required

night_offtake_cost_per_mwhNight Offtake Cost Per Mwh (number)required

day_injection_cost_per_mwhDay Injection Cost Per Mwh (number)required

night_injection_cost_per_mwhNight Injection Cost Per Mwh (number)required

dynamic

offtake_day_ahead_coefficientOfftake Day Ahead Coefficient (number)required

offtake_cost_per_mwhOfftake Cost Per Mwh (number)required

injection_day_ahead_coefficientInjection Day Ahead Coefficient (number)required

injection_cost_per_mwhInjection Cost Per Mwh (number)required

day_ahead_bidding_zoneBiddingZone (string)required

Possible values: [DE_50HZ, AL, DE_AMPRION, AT, BY, BE, BA, BG, CZ_DE_SK, HR, CWE, CY, CZ, DE_AT_LU, DE_LU, DK, DK_1, DK_1_NO_1, DK_2, DK_CA, EE, FI, MK, FR, DE, GR, HU, IS, IE_SEM, IE, IT, IT_SACO_AC, IT_CALA, IT_SACO_DC, IT_BRNN, IT_CNOR, IT_CSUD, IT_FOGN, IT_GR, IT_MACRO_NORTH, IT_MACRO_SOUTH, IT_MALTA, IT_NORD, IT_NORD_AT, IT_NORD_CH, IT_NORD_FR, IT_NORD_SI, IT_PRGP, IT_ROSN, IT_SARD, IT_SICI, IT_SUD, RU_KGD, LV, LT, LU, LU_BZN, MT, ME, GB, GE, GB_IFA, GB_IFA2, GB_ELECLINK, UK, NL, NO_1, NO_1A, NO_2, NO_2_NSL, NO_2A, NO_3, NO_4, NO_5, NO, PL_CZ, PL, PT, MD, RO, RU, SE_1, SE_2, SE_3, SE_4, RS, SK, SI, GB_NIR, ES, SE, CH, DE_TENNET, DE_TRANSNET, TR, UA, UA_DOBTPP, UA_BEI, UA_IPS, XK, DE_AMP_LU]

fixed

fixed_offtake_cost_per_mwhFixed Offtake Cost Per Mwh (number)required

fixed_injection_cost_per_mwhFixed Injection Cost Per Mwh (number)required

null

null

dso_connection object

anyOf

DSOConnection

dsorequired

Possible values: [AIEG, AIESH, Fluvius, German, ORES, RESA, REW, Sibelga]

AIEG

regionRegion (string)required

Constant value: All

connection_typeConnection Type (string)required

Possible values: [T-MT avec terme capacitaire, T-MT sans terme capacitaire, MT avec terme capacitaire, MT sans terme capacitaire, T-BT avec terme capacitaire, T-BT sans terme capacitaire, BT>56kVA - heures normales, BT>56kVA - heures pleines/creuses, BT - heures normales, BT - heures pleines/creuses, BT - heures incitative]

AIESH

regionRegion (string)required

Constant value: All

connection_typeConnection Type (string)required

Possible values: [T-MT avec terme capacitaire, T-MT sans terme capacitaire, MT avec terme capacitaire, MT sans terme capacitaire, T-BT avec terme capacitaire, T-BT sans terme capacitaire, BT>56kVA - heures normales, BT>56kVA - heures pleines/creuses, BT - heures normales, BT - heures pleines/creuses, BT - heures incitative]

Fluvius

regionRegion (string)required

Possible values: [Imewo, West, Antwerpen, Midden-Vlaanderen, Zenne-Dijle, Halle-Vilvoorde, Kempen, Limburg]

connection_typeConnection Type (string)required

Possible values: [Low Voltage Network, <= 1 kV Distribution Cabine, 1-26 kV-net, 1-26 kV-post, 26-36 kV-net, 26-36 kV-post]

toegangsvermogenToegangsvermogen (number)required

German

dso_nameDso Name (string)required

metering_typeMetering Type (string)required

Possible values: [RLM, SLP]

leistungspreis_per_kw_per_yearLeistungspreis Per Kw Per Year (number)required

arbeitspreis_per_mwhArbeitspreis Per Mwh (number)required

grid_fixed_yearly_priceGrid Fixed Yearly Price (number)required

stromsteuer_per_mwhStromsteuer Per Mwh (number)required

konzessionsabgabe_per_mwhKonzessionsabgabe Per Mwh (number)required

levies_per_mwhLevies Per Mwh (number)required

ORES

regionRegion (string)required

Possible values: [Brabant Wallon, Est, Hainaut, Luxembourg, Mouscron, Namur, Verviers]

connection_typeConnection Type (string)required

Possible values: [T-MT avec terme capacitaire, T-MT sans terme capacitaire, MT avec terme capacitaire, MT sans terme capacitaire, T-BT avec terme capacitaire, T-BT sans terme capacitaire, BT>56kVA - heures normales, BT>56kVA - heures pleines/creuses, BT - heures normales, BT - heures pleines/creuses, BT - heures incitative]

RESA

regionRegion (string)required

Constant value: All

connection_typeConnection Type (string)required

Possible values: [T-MT avec terme capacitaire, T-MT sans terme capacitaire, MT avec terme capacitaire, MT sans terme capacitaire, T-BT avec terme capacitaire, T-BT sans terme capacitaire, BT>56kVA - heures normales, BT>56kVA - heures pleines/creuses, BT - heures normales, BT - heures pleines/creuses, BT - heures incitative]

REW

regionRegion (string)required

Constant value: All

connection_typeConnection Type (string)required

Possible values: [T-MT avec terme capacitaire, T-MT sans terme capacitaire, MT avec terme capacitaire, MT sans terme capacitaire, T-BT avec terme capacitaire, T-BT sans terme capacitaire, BT>56kVA - heures normales, BT>56kVA - heures pleines/creuses, BT - heures normales, BT - heures pleines/creuses, BT - heures incitative]

Sibelga

regionRegion (string)required

Constant value: Brussels Capital Region

connection_typeConnection Type (string)required

Possible values: [MT - aliment. principale, MT - aliment. secours, BT - avec mesure de pointe, BT - sans mesure de pointe <=13kVA, BT - sans mesure de pointe >13kVA, BT - sans comptage <=13kVA, BT - sans comptage >13kVA]

null

null

ingress_validation object

anyOf

SiteIngressValidationConfig

main_collector_expected_measurement_interval object

Expected measurement interval applied to every collector on the site. When null, collectors are always considered valid. Note: the UCL calculation requires grid measurements at least every 5 minutes to produce accurate results, so the main collector should not exceed a 5-minute interval.

anyOf

string

string

null

null

asset object

Default ingress validation for assets. Used when an asset has no ingress_validation override and no per_asset_type entry matches.

with_transaction_expected_measurement_intervalstring<duration>

Expected measurement interval for the asset while it has an active transaction. Measurements arriving less frequently than this are flagged as stale by ingress validation. Note: the UCL calculation requires measurements at least every 5 minutes to produce accurate results, so this value should not exceed 5 minutes for assets that participate in the uncontrollable-load computation.

without_transaction_expected_measurement_interval object

Expected measurement interval for the asset when no transaction is active. When null, the asset is always considered valid while idle. Note: the UCL calculation requires measurements at least every 5 minutes to produce accurate results, so if this asset contributes to the uncontrollable-load computation it should still report at least every 5 minutes.

anyOf

string

string

null

null

per_asset_type object

Per-asset-type defaults that override the site-level asset defaults. An asset without its own ingress_validation falls back to the per-type config (if present) before falling back to asset.

property name* AssetIngressValidationConfig

with_transaction_expected_measurement_intervalstring<duration>

Expected measurement interval for the asset while it has an active transaction. Measurements arriving less frequently than this are flagged as stale by ingress validation. Note: the UCL calculation requires measurements at least every 5 minutes to produce accurate results, so this value should not exceed 5 minutes for assets that participate in the uncontrollable-load computation.

without_transaction_expected_measurement_interval object

Expected measurement interval for the asset when no transaction is active. When null, the asset is always considered valid while idle. Note: the UCL calculation requires measurements at least every 5 minutes to produce accurate results, so if this asset contributes to the uncontrollable-load computation it should still report at least every 5 minutes.

anyOf

string

string

null

null

null

null

UpdateSiteConfigurationDTO

{
  "site_configuration": {
    "device_list": [
      {
        "name": "LR34_001",
        "collector": "main_collector",
        "ingress_validation": {
          "with_transaction_expected_measurement_interval": "string",
          "without_transaction_expected_measurement_interval": "string"
        },
        "type": "charging_pole_3phase",
        "line_current": 32,
        "pin_to_phase_mapping": {
          "pin_list": [
            "pin1"
          ],
          "phase_list": [
            "L1"
          ]
        }
      },
      {
        "phase_permutations": {
          "parent": [
            "L1"
          ],
          "child": [
            "L1"
          ]
        },
        "name": "LR34_001",
        "collector": "main_collector",
        "ingress_validation": {
          "with_transaction_expected_measurement_interval": "string",
          "without_transaction_expected_measurement_interval": "string"
        },
        "type": "dc_charging_pole",
        "max_power": 250000,
        "strategy": "load-balancing"
      },
      {
        "phase_permutations": {
          "parent": [
            "L1"
          ],
          "child": [
            "L1"
          ]
        },
        "name": "LR34_001",
        "collector": "main_collector",
        "ingress_validation": {
          "with_transaction_expected_measurement_interval": "string",
          "without_transaction_expected_measurement_interval": "string"
        },
        "type": "forecasted_series_3phase",
        "line_current": 32,
        "forecast_type": "pv",
        "should_be_aggregated": false,
        "curtailment_mode": "none"
      },
      {
        "phase_permutations": {
          "parent": [
            "L1"
          ],
          "child": [
            "L1"
          ]
        },
        "name": "LR34_001",
        "collector": "main_collector",
        "ingress_validation": {
          "with_transaction_expected_measurement_interval": "string",
          "without_transaction_expected_measurement_interval": "string"
        },
        "type": "battery_energy_storage_system",
        "charging_efficiency": 0.95,
        "discharging_efficiency": 0.95,
        "maximum_charging_power": 50000,
        "maximum_discharging_power": 50000,
        "operational_battery_capacity": 100000,
        "charging_priority": 5,
        "discharging_priority": 5,
        "policies": [
          {
            "type": "schedule",
            "schedule": {
              "frequency": "weekly",
              "day_of_week": [
                "monday",
                "friday"
              ],
              "time": "09:00",
              "timezone": "America/New_York"
            },
            "minimum_state_of_charge": 20,
            "maximum_state_of_charge": 80,
            "violation_price_euros_per_mwh": 3000000
          },
          {
            "type": "charge-hysteresis",
            "start_charging_below": 10,
            "stop_charging_at": 20
          }
        ]
      }
    ],
    "collector_list": [
      {
        "phase_permutations": {
          "parent": [
            "L1"
          ],
          "child": [
            "L1"
          ]
        },
        "name": "main_collector",
        "children": [
          null
        ],
        "line_current": 400,
        "safe_line_current": 300,
        "min_phase_current": 0,
        "phase_voltage": 230,
        "commodity": "electricity",
        "1P_3P": "3P"
      }
    ]
  },
  "optimization_configuration": {
    "peak_minimization": {
      "active": true,
      "peak_limit": 100000
    },
    "negative_peak_minimization": {
      "active": true,
      "peak_limit": 100000
    },
    "cost_minimization_active": true,
    "planning_frequency": "PT15M",
    "planning_horizon": "P1D"
  },
  "energy_contract": {
    "fixed_offtake_cost_per_mwh": 0,
    "fixed_injection_cost_per_mwh": 0,
    "contract_type": "fixed"
  },
  "dso_connection": {
    "dso": "string",
    "region": "Imewo",
    "connection_type": "Low Voltage Network",
    "toegangsvermogen": 0
  },
  "ingress_validation": {
    "main_collector_expected_measurement_interval": "string",
    "asset": {
      "with_transaction_expected_measurement_interval": "string",
      "without_transaction_expected_measurement_interval": "string"
    },
    "per_asset_type": {}
  }
}